Yes, she is ugly but kinda cool too.
Posted: Mon Mar 16, 2020 10:35 am
I pieced this rifle together from hard to find parts on line and different gun shows over the last year and a half. Ugly you say? Yes but ugly cool and very different too.
The VZ 52 was semi auto rifle made shortly after the second world war in Czechoslovakia. It fires the unique 7.62X45 cartridge. Due to Russian pressure, later models will be found in 7.62X39 but are very rare and hard to find.
Copied from Wikipedia.
‘The vz. 52 is a shoulder-fired semi-automatic rifle with a tilting-bolt locking mechanism powered by an annular short-stroke gas piston system. The bolt is locked by two lugs that recess into slots machined into the receiver. However, unlike most vertically-locking breech mechanism, the rifle's bolt has the unusual feature of tipping the bolt frontally to lock the mechanism, whereas other tipping bolt designs tip the bolt to the rear.[7] The piston is actuated by residual gases from the bore, vented into a sleeve surrounding the barrel to overcome the inertia of the bolt carrier, bolt and the resistance of the return spring in order to unlock the chamber, eject the empty cartridge casing and then introduce a new round into the chamber upon return to battery.
The barrel is press-fit and pinned into the receiver. The manual safety switch is placed inside of the trigger guard and is manipulated by the shooter's index finger. The trigger mechanism closely resembles that used in the American M1 Garand semi-automatic rifle. The cocking handle is integrated into the bolt carrier and is located on the right side of the rifle; this arrangement enables the shooter to reload the rifle without disturbing his aim.”
The VZ 52 was semi auto rifle made shortly after the second world war in Czechoslovakia. It fires the unique 7.62X45 cartridge. Due to Russian pressure, later models will be found in 7.62X39 but are very rare and hard to find.
Copied from Wikipedia.
‘The vz. 52 is a shoulder-fired semi-automatic rifle with a tilting-bolt locking mechanism powered by an annular short-stroke gas piston system. The bolt is locked by two lugs that recess into slots machined into the receiver. However, unlike most vertically-locking breech mechanism, the rifle's bolt has the unusual feature of tipping the bolt frontally to lock the mechanism, whereas other tipping bolt designs tip the bolt to the rear.[7] The piston is actuated by residual gases from the bore, vented into a sleeve surrounding the barrel to overcome the inertia of the bolt carrier, bolt and the resistance of the return spring in order to unlock the chamber, eject the empty cartridge casing and then introduce a new round into the chamber upon return to battery.
The barrel is press-fit and pinned into the receiver. The manual safety switch is placed inside of the trigger guard and is manipulated by the shooter's index finger. The trigger mechanism closely resembles that used in the American M1 Garand semi-automatic rifle. The cocking handle is integrated into the bolt carrier and is located on the right side of the rifle; this arrangement enables the shooter to reload the rifle without disturbing his aim.”
