The Russian Mosin Nagant Forum

Darryl wrote: ↑Fri Feb 12, 2021 11:16 am

fivesevenn wrote: ↑Fri Feb 12, 2021 8:05 am hi, I recently acquired a Mosin Nagant, I recently loved the Mosin, so I had to get one. Always wanted the sniper PU, but I kind of rushed when i saw one, i knew some basics of parts that i should look for, which passed. either ways, i have all matching numbers on my Mosin, even to the scope mount. hope to learn lots more on this forum!

How much did you pay?

You do know the serial numbers on a Mosin usually are "forced matched". So that means very little.

Big change you have taken. Well, when you get it, post it here and we will see if you got a "real deal" or not.

Remember, what is posted in most articles about authenticity is know by the Fakers also.
It is a small part of what we know and don't post the rest openly.

Good luck! You probably did OK.

Darryl

Thank Darryl, Appreciate it. i did reach out to the seller, as he only aquired it himself through someone who passed away. so he has no knowledge or history about it. i posted some pictures if anyone can identify, pretty sure its a repo scope and possibly i know the stock might be not original,
but i do know:
1943 Izhevsk
Thanks Everyone.

IMG_20210215_122815 by Bryan
IMG_20210215_122831 by Bryan
IMG_20210215_122914 by Bryan
IMG_20210215_122933 by Bryan
IMG_20210215_122948 by Bryan
IMG_20210215_123003 by Bryan
IMG_20210215_123036 by Bryan
IMG_20210215_123722 by Bryan
IMG_20210215_123810 by Bryan
IMG_20210215_123832 by Bryan

Would love to see more photos of the scope itself.
Also the left side of the barrel shank (not the right side)
Under the bend of the bolt handle. And bolt in the action.
And most importantly, the import marks.

the mount is reproduction.
the finger grip slot is way too sharp an edge for my liking also.

Darryl

Thanks Darryl, at least i know whats going on with the Mosin. attached are more pictures of what you requested. (bolt is loose due to firing pin broken - ordered a new one).
is the trigger assembly tula? i see a star in the front
also no import markings on the barrel (apparently some/most imported to canada has no import markings) - from what i found.
scope i found out was from westrifle (repro) - looks exactly the same. good to know the mount is also repro. but is the barrel, receiver and bolt actually from a PU? Thanks

IMG_20210215_214226
IMG_20210215_213648
IMG_20210215_213629
IMG_20210215_212747
IMG_20210215_212515
IMG_20210215_212354
IMG_20210215_212350
IMG_20210215_212339
IMG_20210215_212150

Darryl wrote: ↑Mon Feb 15, 2021 3:10 pm Would love to see more photos of the scope itself.
Also the left side of the barrel shank (not the right side)
Under the bend of the bolt handle. And bolt in the action.
And most importantly, the import marks.

the mount is reproduction.
the finger grip slot is way too sharp an edge for my liking also.

Darryl

When I can see the scope, bend of the bolt, and most important the import mark, then I can say what you have. I know Miller Tyme will chime in too when you get those photos.

Darryl

Darryl wrote: ↑Thu Feb 18, 2021 4:24 pm

Darryl wrote: ↑Mon Feb 15, 2021 3:10 pm Would love to see more photos of the scope itself.
Also the left side of the barrel shank (not the right side)
Under the bend of the bolt handle. And bolt in the action.
And most importantly, the import marks.

the mount is reproduction.
the finger grip slot is way too sharp an edge for my liking also.

Darryl

When I can see the scope, bend of the bolt, and most important the import mark, then I can say what you have. I know Miller Tyme will chime in too when you get those photos.

Darryl

He has 4 pics of the bolt. From my not expert perspective, it looks to be a welded on one.

I will change my response to ...

"When I can see the scope, Left side of the barrel shank (while in the stock), and most important the import mark, then I can say what you have."

I agree, the bolt looks way too polished and welded on. I believe it is a reproduction also.
But remember, the Russians "welded on" the original bolts also. Just a little differently.

Left barrel shank and import marks photos will give the final decision on reproduction or not.

Darryl

Sorry about the delay in responding, this cold weather is running us ragged at work. I will have to pull this on my computer latter as i have some reservations on the rifle, but its hard to say for sure on a 2"×3" screen.

Now that I have seen it on my computer I am sure it is a reproduction PU. The bolt is all wrong, the mount looks like it is cast, possibly aluminum or pot metal, the inside of the receiver looks to have been painted, not something the arsenal would do, and the inspection marks on the L/H side of the barrel shank where the scope number would have been shouldn't be there on a sniper.