Page 1 of 1
Remington M91 carbine
Posted: Mon Jun 08, 2020 7:40 pm
by Jamey76
Have any of guys seen or heard of an M38 or any other carbine from a Remington M91. It has the original M91 rear sight, which I have never seen on a carbine. It's not a Bannerman and definitely doesn't looked Bubba'd. Thanks.
Sent from my SM-G955U using Tapatalk
Re: Remington M91 carbine
Posted: Mon Jun 08, 2020 10:22 pm
by willyj73
I've seen a Remington and a Westinghouse shortened before. Here is a photo of the Westinghouse from an auction a few years ago. I thought it was a Uulani carbine, but was told it wasn't. Not sure what it was.
Re: Remington M91 carbine
Posted: Tue Jun 09, 2020 4:43 am
by neal45
One Remington 91/38 has been reliably reported. It would have the 91/38 style and markings. It would also be very valuable.
Re: Remington M91 carbine
Posted: Tue Jun 09, 2020 5:18 am
by Jamey76
neal45 wrote:One Remington 91/38 has been reliably reported. It would have the 91/38 style and markings. It would also be very valuable.
Definitely does not have the 91/38 markings.
Sent from my SM-G955U using Tapatalk
Re: Remington M91 carbine
Posted: Tue Jun 09, 2020 7:19 am
by qz2026
Is this your gun? I'd love to see a bunch of pictures...
Re: Remington M91 carbine
Posted: Tue Jun 09, 2020 7:42 am
by Jamey76
qz2026 wrote:Is this your gun? I'd love to see a bunch of pictures...
I have a chance to purchase it locally. I'm definitely leaning towards grabbing it.
Sent from my SM-G955U using Tapatalk
Re: Remington M91 carbine
Posted: Tue Jun 09, 2020 8:47 am
by qz2026
Might be a good idea to get some pictures and run it by the guys here first.
Re: Remington M91 carbine
Posted: Tue Jun 09, 2020 9:40 am
by Jamey76
Here are the two photos available.
Sent from my SM-G955U using Tapatalk
Re: Remington M91 carbine
Posted: Tue Jun 09, 2020 10:31 am
by willyj73
The rifle is some kind of bubba gunsmith put together. It's not a 91/38. The 91/38s did not use Konovalov rear sights. And, it has no 91/38 markings. I don't know who would have shortened the barrel. I'm going to guess the elevation is off unless they calibrated the front sight for a specific distance. I personally wouldn't waste any money on that rifle. If you have extra money, you like it, you just want something to stick a 54r cartridge into to listen/feel it go "bang", and the price is cheap ($200 or less), I suppose it wouldn't be bad. But, you can find refurbs for a little more money.
Re: Remington M91 carbine
Posted: Tue Jun 09, 2020 11:35 am
by ffuries
willyj73 wrote: ↑Tue Jun 09, 2020 10:31 am
The rifle is some kind of bubba gunsmith put together. It's not a 91/38. The 91/38s did not use Konovalov rear sights. And, it has no 91/38 markings. I don't know who would have shortened the barrel. I'm going to guess the elevation is off unless they calibrated the front sight for a specific distance. I personally wouldn't waste any money on that rifle. If you have extra money, you like it, you just want something to stick a 54r cartridge into to listen/feel it go "bang", and the price is cheap ($200 or less), I suppose it wouldn't be bad. But, you can find refurbs for a little more money.
Just asking a uneducated question here.....Would someone go through all the trouble to do that and shorten the cleaning rod? Or would a standard M44 cleaming rod work with this setup?
Re: Remington M91 carbine
Posted: Tue Jun 09, 2020 11:56 am
by qz2026
I can't tell for sure but the front sight looks legit. But, it's hard to tell. Pretty cool little gun I'd say. For the right price, I'd be all over it But, that just me... Whoever did this work, did a really good job. Have to see the crown though.
Re: Remington M91 carbine
Posted: Tue Jun 09, 2020 12:50 pm
by willyj73
ffuries wrote: ↑Tue Jun 09, 2020 11:35 am
willyj73 wrote: ↑Tue Jun 09, 2020 10:31 am
The rifle is some kind of bubba gunsmith put together. It's not a 91/38. The 91/38s did not use Konovalov rear sights. And, it has no 91/38 markings. I don't know who would have shortened the barrel. I'm going to guess the elevation is off unless they calibrated the front sight for a specific distance. I personally wouldn't waste any money on that rifle. If you have extra money, you like it, you just want something to stick a 54r cartridge into to listen/feel it go "bang", and the price is cheap ($200 or less), I suppose it wouldn't be bad. But, you can find refurbs for a little more money.
Just asking a uneducated question here.....Would someone go through all the trouble to do that and shorten the cleaning rod? Or would a standard M44 cleaming rod work with this setup?
Well, it's in a standard stock--standard as in it's standard length (country of origin or rework unknown...also unknown if it's been refinished in the U.S.), so a carbine length cleaning rod will work.
Re: Remington M91 carbine
Posted: Tue Jun 09, 2020 12:52 pm
by willyj73
qz2026 wrote: ↑Tue Jun 09, 2020 11:56 am
I can't tell for sure but the front sight looks legit. But, it's hard to tell. Pretty cool little gun I'd say. For the right price, I'd be all over it But, that just me... Whoever did this work, did a really good job. Have to see the crown though.
Yeah, it looks like a Mosin blade sight w/front sight base. But, it's impossible to tell from the photos.
Re: Remington M91 carbine
Posted: Tue Jun 09, 2020 6:29 pm
by steelbuttplate
I'm gonna keep an eye out for one o them mini-91's. That would make a good family member. I could call him "little Richard"
Re: Remington M91 carbine
Posted: Thu Mar 31, 2022 12:34 am
by WSarchet
Raising the dead threadwise here but could these be Civil Guard carbines from the 1920s?
Re: Remington M91 carbine
Posted: Thu Mar 31, 2022 6:20 am
by racerguy00
If so this one had a wartime stock put on it somewhere.
Re: Remington M91 carbine
Posted: Thu Mar 31, 2022 10:05 am
by WSarchet
The Armslist one for sure got a new stock, although if it was Finnish no telling what happened to it in their workshops. The auction one though to me looks like a more likely candidate for an original Guard carbine.