Page 1 of 1

Help with a Tulski import

Posted: Sat Aug 17, 2019 1:19 pm
by Sapper
Does anyone have any history/information on the Mosins exported by Tulski? I'll I have to work with is their mark and four digit serial on the barrel. Heres a Left, Top, and Right of the receiver and barrel. Any help is appreciated, I'm not asking for a full blown history l, yet. That's half the fun is the research, but I'm at a point where I haven't found much. Thanks you all in advance.

Re: Help with a Tulski import

Posted: Sat Aug 17, 2019 2:26 pm
by tomaustin
no pics........

Re: Help with a Tulski import

Posted: Sat Aug 17, 2019 4:38 pm
by Sapper
Sorry for all the confusion! Still learning the forum.

So as far as I've been able to tell this is a Tulski Expoted rifle, who imported it, I don't know. What I do know is that the the four digit "dot matrix" like S/N is the only import mark that I've been able to spot. Nothing on the barrel, nothing hiding under a plate. I figured this is a good place to start regarding hunting down information about this Mosin. I'll post more pictures when I get a second.

Re: Help with a Tulski import

Posted: Sat Aug 17, 2019 7:07 pm
by Sapper
After reading some more, I discovered what the problem was. Can't upload pictures with >1000pixels across or top to bottom. Again thank you all for your patience.

Re: Help with a Tulski import

Posted: Sun Aug 18, 2019 5:35 am
by steelbuttplate
Tulsky triangle T confused with Tikka sometimes, does it have filled holes inside when you slide the bolt back ?

Re: Help with a Tulski import

Posted: Sun Aug 18, 2019 9:23 am
by Sapper
More pictures! I'll explain the best I can what I see in each picture, and if there is something specific someone wants to see please tell me! I'll fill your request as soon as I can.

Re: Help with a Tulski import

Posted: Sun Aug 18, 2019 9:35 am
by Sapper
*.*

Re: Help with a Tulski import

Posted: Sun Aug 18, 2019 9:58 am
by Sapper
Last group of photos! Again any help would be awesome. Looking around different forums and posts ive learned a little bit, but when it comes to the finer details I'm a out of my league. Speaking of advanced knowledge with these rifles, what litterateur do you all suggest? I'd like to not have to ask a bunch of questions one day :D

Re: Help with a Tulski import

Posted: Sun Aug 18, 2019 10:00 am
by Sapper
Also I know I didn't take may pictures of the bolt, but I can if requested. There's marks all over it too, I just ran out of time today. Taking these pictures, picking out the best, then making them compatable for the forum to accept, that took some time. The woman was a little pissed, but whatever :)

Re: Help with a Tulski import

Posted: Tue Aug 20, 2019 5:58 am
by steelbuttplate
I think that's the real deal :thumbsup: you shot it yet ?

Re: Help with a Tulski import

Posted: Tue Aug 20, 2019 10:04 am
by Sapper
I've had this rifle for years, and unfortunately life kinda gets in the way most weekends I'm not shooting USPSA.

What about the markings that are all over this guy? Like the tombstone C18, the circle 52 on the receiver, things like that. Even information on the optic would be appreciated. I went through The Ratnik PU Scope Collection and didn't see anything like the one on the rifle. Looking around other forums, I've only seen one other person with the same kind of markings on there Mosin optic, but nothing was mention about it. Again and weird origin stories about some of the markings is gratefully welcomed :)

Re: Help with a Tulski import

Posted: Tue Dec 10, 2019 12:27 pm
by rick54
Hello, i saw the same thing as well. It seem that the optic has been painted and if you scratch you might find some russian marks under the painting.

Re: Help with a Tulski import

Posted: Sun Dec 29, 2019 6:48 am
by Sapper
I'll take your word for it. Not going to scratch of the paint.

Re: Help with a Tulski import

Posted: Sun Dec 29, 2019 6:59 am
by Sapper
UPDATE: the п inside circle mark found on the reciever wall, it means that the rifle's strength was tested with the factory's "test ammo". From what I've read, that "test ammo" was pretty much an equivalent to +P+ ammo.

Re: Help with a Tulski import

Posted: Sat Jan 11, 2020 3:46 am
by Ratnik
It's not correct. П in circle (or O in circle) marking at the reciver or at any other part except barrel - pressure or strength test with a special device