Page 1 of 1
Brass hand guard caps
Posted: Wed Feb 25, 2015 7:03 pm
by ranman106
How common are the brass caps on the 91/30? I have only seen one in person and I put it on lay a way because of the brass.

Re: Brass hand guard caps
Posted: Wed Feb 25, 2015 7:09 pm
by qz2026
These are fairly common but no where near as common as the black painted ones. If I were looking for a period correct refurb, I might pay a slight premium for one with the brass handguard end caps. Just don't shine them when you get the rifle. Leave them alone... What is the year and armory of the rifle? Type stock?
Re: Brass hand guard caps
Posted: Wed Feb 25, 2015 7:15 pm
by B24
Nowhere near as common as the steel ones are but not that rare either. I only have 6 Mosins and 1out of the group has the brass caps. It is a plus to have them in my book.
Re: Brass hand guard caps
Posted: Wed Feb 25, 2015 7:31 pm
by Adam_9130
My 1944 91/30 has the brass, I've definately run across way more of the black painted caps. What year is your rifle?
Re: Brass hand guard caps
Posted: Wed Feb 25, 2015 7:35 pm
by Lee-online
A few years ago they were common but now you don't see them too often.
I purchased a few spare handguards from aim the other year and I got some of each.
Re: Brass hand guard caps
Posted: Wed Feb 25, 2015 7:48 pm
by Junk Yard Dog
They can be found on any 91/30, it's purely chance. They can also be found on the 91/59's.
Re: Brass hand guard caps
Posted: Thu Feb 26, 2015 8:02 am
by ranman106
Izhevsk 1943
Re: Brass hand guard caps
Posted: Thu Feb 26, 2015 10:05 am
by zeebill
If you want to collect refurbs they might make you buy them but I find most older non-refurbs tend to have brass end caps. Now if you really want to get picky I have seen copper end caps and matter of fact one of the Dragoons I have for sale at shows has them. I have seen steel end caps with copper rivets, brass end caps with steel rivets, black painted end caps with brass rivets, steel end caps with steel rivets, and probably any number of other combinations I have forgotten with time. I frankly have never bought a rifle because of what kind of end caps it might have as I find it trivial. The other stuff I look for is far more important to me. Bill

Re: Brass hand guard caps
Posted: Thu Feb 26, 2015 11:27 am
by docbob
Got some brass ones and some steel ones. I do happen to like the brass ones for the contrast but I wouldn't buy extra for them.
Re: Brass hand guard caps
Posted: Thu Feb 26, 2015 2:25 pm
by steelbuttplate
Don't shine a brass end cap? If you clean your gun the're gonna shine some

Don't clean your gun???

I

Ya'all startin to sound like a bunch of Yankees. Junk Yard Dog ain't a gonna like this, I will probably get disciplined again SBP 62 MN's
Re: Brass hand guard caps
Posted: Thu Feb 26, 2015 3:46 pm
by redeuce
There is a difference to cleaning an end cap when you clean a rifle, and using a buffer wheel or fine steel wool to remove all patina. I believe that was his point.
Re: Brass hand guard caps
Posted: Thu Feb 26, 2015 5:55 pm
by ranman106
That's whats great about collecting, it's whatever you like!
Re: Brass hand guard caps
Posted: Thu Feb 26, 2015 10:44 pm
by bunkysdad
It only takes decades for the old age patina of old brass caps to look their age. If you want to polish them then go for it, but you sure can't go back and fix it, ain't got nothing to do with cleaning your gun.

Re: Brass hand guard caps
Posted: Fri Feb 27, 2015 9:34 am
by steelbuttplate
Beautiful Tula, what yr.? Spanish CW?
Re: Brass hand guard caps
Posted: Fri Feb 27, 2015 2:11 pm
by Lee-online
The patina between originals, refurbs and newly polished is very obvious.
Some refurbs have the brass caps but have been painted black just like the steel ones.