Page 1 of 1
saw odd escutcheons on a 39 Tula today
Posted: Wed Jul 30, 2014 9:39 am
by walnut red
The front escutcheons were the wartime half escutcheons which are not uncommon at all. However the rear escutcheons were the pre-war type except that instead of screws they were held in will little tacks or nails. Logically it makes sense as a war time transition to go from screws to nails, I've just never seen it before now.
Re: saw odd escutcheons on a 39 Tula today
Posted: Wed Jul 30, 2014 10:33 am
by djbuck1
Is it a spliced stock?
Re: saw odd escutcheons on a 39 Tula today
Posted: Wed Jul 30, 2014 10:47 am
by Junk Yard Dog
Transitional stock, 1941 or 42 during the changeover, old parts were used until that ran out.
Re: saw odd escutcheons on a 39 Tula today
Posted: Wed Jul 30, 2014 11:20 am
by zeebill
I sure would love to see pictures of that one before I say anything about what it might be. Bill

Re: saw odd escutcheons on a 39 Tula today
Posted: Wed Jul 30, 2014 11:35 am
by bunkysdad
zeebill wrote:I sure would love to see pictures of that one before I say anything about what it might be. Bill

Yes, me too.
Re: saw odd escutcheons on a 39 Tula today
Posted: Wed Jul 30, 2014 12:04 pm
by walnut red
If it's still there I'll post some pictures. I didn't notice a stock splice and just assumed that screws were one of the things that were eliminated as they streamlined production.
Re: saw odd escutcheons on a 39 Tula today
Posted: Wed Jul 30, 2014 12:41 pm
by redspoon
walnut red wrote:Logically it makes sense as a war time transition to go from screws to nails, I've just never seen it before now.
Never seen one with little nails in the escutcheons either, but I do have a 46 Izhevsk m44 with a big arse nail in the butt plate.
IMG_2380.JPG
Re: saw odd escutcheons on a 39 Tula today
Posted: Wed Jul 30, 2014 2:45 pm
by IvanIvanovich
Is it a refurb? I have seen a couple that appear to have had the escutcheons sanded right along with the stock during refurb. The slots on some of the screws were almost completely sanded away. I assumed the screws wouldn't come out or Igor was lazy that day. But I could see how, if done uniformly, the screws could appear to be tacks.