Page 1 of 1

Bore Pics -- Showing Off a Bit! W00T!

Posted: Fri Sep 02, 2011 6:00 am
by Josh Smith
Hello,

I got done cleaning out my Gewehr 88's bore. To check any work I do, I usually use macro pictures as well as magnifying tools.

This bore actually went back to almost-new condition. The rust that was on it hadn't penetrated too far down -- looks like it was maybe just there from sitting unprotected for a year in a gunshop, assumed to be a parts gun!

Image

Image

Image

I am rather thrilled.

This means my rifle is in 95% or better condition -- on of the better ones out there -- and the bore is not nearly as bad as I thought!

The only problem is that it's not all matching, but no biggie. I probably wouldn't shoot it otherwise!

Not bad for $37.50, eh? :eek:

Regards,

Josh

Re: Bore Pics -- Showing Off a Bit! W00T!

Posted: Fri Sep 02, 2011 8:45 am
by Darryl
That is really cool. I wish someone (or two) would do a "how to" photograph your barrel.

Those are some nice shots


Dolk

Re: Bore Pics -- Showing Off a Bit! W00T!

Posted: Fri Sep 02, 2011 8:54 am
by millman
8-) 8-)

Re: Bore Pics -- Showing Off a Bit! W00T!

Posted: Fri Sep 02, 2011 9:30 am
by desdem12
Just about time to dirty it up again 8-) 8-)

Re: Bore Pics -- Showing Off a Bit! W00T!

Posted: Fri Sep 02, 2011 9:33 am
by Longcolt44
dolk wrote:That is really cool. I wish someone (or two) would do a "how to" photograph your barrel.

Those are some nice shots


Dolk

Yes, please do. I have tried several times and maybe 1 good one in many tries.

Re: Bore Pics -- Showing Off a Bit! W00T!

Posted: Fri Sep 02, 2011 9:53 am
by Rongo
Very nice... So how did you get those pics?

Re: Bore Pics -- Showing Off a Bit! W00T!

Posted: Tue Sep 06, 2011 7:13 pm
by polymerase2
Show me the crown!

Re: Bore Pics -- Showing Off a Bit! W00T!

Posted: Tue Sep 06, 2011 7:23 pm
by Junk Yard Dog
Nice job Josh :)

Re: Bore Pics -- Showing Off a Bit! W00T!

Posted: Tue Sep 06, 2011 7:36 pm
by martin08
Through many trials and errors on bore pics:

1. I've found that natural light works best when possible. Place the open chamber in the sunlight, and the muzzle in the shade.
2. Get a camera with super macro.
3. Hold the shutter button 1/2 way to focus at a position about 4" from the crown. When it pulls the crown in sharply, keep the shutter depressed 1/2 way, and move to within 1-2" of the bore.
4. Snap photo.

In artificial light.

1. Place a thin sheet of white paper in the chamber with a bore light behind it.
2. Use normal or macro setting (not super macro)
3. Use a black piece of paper with a hole and slip it over the muzzle to the depth of the bore that you wish to capture.
4. From 3-4 feet away, let the camera focus on the black piece of paper, snap shot.
5. Crop pic to bore size and save.


And great save, Josh. Shoot that one a lot!

Re: Bore Pics -- Showing Off a Bit! W00T!

Posted: Sun Sep 18, 2011 1:52 pm
by Josh Smith
polymerase2 wrote:Show me the crown!
Hi Gents,

Some folks were asking to see the crown. Here she be!

Image

Image

I count one small nick. I was going to polish it, but heck, I'm shooting twigs the width of my pinkie at 30 yards unsupported.

How do you rate the crown?

Thanks,

Josh

Re: Bore Pics -- Showing Off a Bit! W00T!

Posted: Mon Sep 19, 2011 2:25 pm
by bunkysdad
Are you sure you didn't mean 237.50 or 337.50? That must have been a typo! :clap:

Re: Bore Pics -- Showing Off a Bit! W00T!

Posted: Mon Sep 19, 2011 3:44 pm
by Longcolt44
I'm showing off too. I'm getting better with my chamber scope. This is the chamber face of my '37 Tula.

Re: Bore Pics -- Showing Off a Bit! W00T!

Posted: Mon Sep 19, 2011 6:35 pm
by millman
Longcolt44 wrote:I'm showing off too. I'm getting better with my chamber scope. This is the chamber face of my '37 Tula.
That old colonoscope works pretty good. I think I see a polyp in your chamber there LC.