Information on Enfield "jungle carbines" Needed

All collectible military bolt rifles are discussed here. From all countries around the world.

Preservation forum, please no altered military surplus rifles or discussions on altering in this forum. Please read the rules at the top of each forum.
User avatar
Junk Yard Dog
Owner/Founder
Owner/Founder
Posts: 48861
Joined: Sat Aug 27, 2011 12:54 pm
Location: New York

Re: Information on Enfield "jungle carbines" Needed

Post by Junk Yard Dog »

:thumbsup:
Leave it as it is. The ages have been at work on it and man can only mar it.
Don't hit at all if it is honorably possible to avoid hitting; but never hit soft.
Theodore Roosevelt
User avatar
Junk Yard Dog
Owner/Founder
Owner/Founder
Posts: 48861
Joined: Sat Aug 27, 2011 12:54 pm
Location: New York

Re: Information on Enfield "jungle carbines" Needed

Post by Junk Yard Dog »

CommoMan wrote:I finally got a close look at the rifle in question. It's a parts gun, with the importer/assembler name stamped on the barrel. Unfortunately, I forgot who it was. There is no trace of Number or Mark designation anywhere on the receiver that I could see. The distance from receiver to barrel band seems to be approximately correct, which threw me off for a few seconds.

Once again, thank you for the help, gentlemen.
Oh well, there will be others.
Leave it as it is. The ages have been at work on it and man can only mar it.
Don't hit at all if it is honorably possible to avoid hitting; but never hit soft.
Theodore Roosevelt
User avatar
etprescottazusa91
Posts: 2169
Joined: Fri Aug 26, 2011 4:12 pm
Location: Arizona

Re: Information on Enfield "jungle carbines" Needed

Post by etprescottazusa91 »

Started reading all the old postings from the beginning, thought this thread from awile back might help you out commoman
http://www.russian-mosin-nagant-forum.c ... f=6&t=2492
"Fast is fine, But accuracy is everything" Wyatt Earp

"This year will go down in history. For the first time, a civilized nation has full gun registration. Our streets will be safer, our police more efficient, and the world will follow our lead into the future!"
Adolph Hitler – 1933
User avatar
Junk Yard Dog
Owner/Founder
Owner/Founder
Posts: 48861
Joined: Sat Aug 27, 2011 12:54 pm
Location: New York

Re: Information on Enfield "jungle carbines" Needed

Post by Junk Yard Dog »

A blast from the past, I forgot that we had a good many of these rifles on the board :)
Leave it as it is. The ages have been at work on it and man can only mar it.
Don't hit at all if it is honorably possible to avoid hitting; but never hit soft.
Theodore Roosevelt
User avatar
ffeng31
Posts: 754
Joined: Wed Nov 28, 2012 2:34 pm
Location: Central Florida

Re: Information on Enfield "jungle carbines" Needed

Post by ffeng31 »

I've been known to dabble in the world of Enfields....
2010_0320gbjungle0028.JPG
You do not have the required permissions to view the files attached to this post.
Jim

Image
User avatar
Junk Yard Dog
Owner/Founder
Owner/Founder
Posts: 48861
Joined: Sat Aug 27, 2011 12:54 pm
Location: New York

Re: Information on Enfield "jungle carbines" Needed

Post by Junk Yard Dog »

:vcool: :vcool: :vcool: :thumbsup:
Leave it as it is. The ages have been at work on it and man can only mar it.
Don't hit at all if it is honorably possible to avoid hitting; but never hit soft.
Theodore Roosevelt
Post Reply