New Members, Make your first post here!
Re: New Members, Make your first post here!
Hello everyone, been collecting Mosin Nagants and other milsurps for 12 years now, first time I really noticed this forum. With my Mosins, I specialize in non Finnish captured, original matching Soviet 91/30s. Hope to learn some new info here!
- Junk Yard Dog
- Owner/Founder

- Posts: 48861
- Joined: Sat Aug 27, 2011 12:54 pm
- Location: New York
Re: New Members, Make your first post here!
Welcome to the boardbrcampbe wrote:Hello everyone, been collecting Mosin Nagants and other milsurps for 12 years now, first time I really noticed this forum. With my Mosins, I specialize in non Finnish captured, original matching Soviet 91/30s. Hope to learn some new info here!
Leave it as it is. The ages have been at work on it and man can only mar it.
Don't hit at all if it is honorably possible to avoid hitting; but never hit soft.
Theodore Roosevelt
Don't hit at all if it is honorably possible to avoid hitting; but never hit soft.
Theodore Roosevelt
Re: New Members, Make your first post here!
Hi All,
I am your typical "addicted to mil surplus" collector. Looking forward to absorbing some of the knowledge of the resident experts!
Thanks for having me,
- Brian
I am your typical "addicted to mil surplus" collector. Looking forward to absorbing some of the knowledge of the resident experts!
Thanks for having me,
- Brian
- Junk Yard Dog
- Owner/Founder

- Posts: 48861
- Joined: Sat Aug 27, 2011 12:54 pm
- Location: New York
Re: New Members, Make your first post here!
Welcome to the board Brianfox252 wrote:Hi All,
I am your typical "addicted to mil surplus" collector. Looking forward to absorbing some of the knowledge of the resident experts!
Thanks for having me,
- Brian
Leave it as it is. The ages have been at work on it and man can only mar it.
Don't hit at all if it is honorably possible to avoid hitting; but never hit soft.
Theodore Roosevelt
Don't hit at all if it is honorably possible to avoid hitting; but never hit soft.
Theodore Roosevelt
Re: New Member
Hello All,
I am a new member and I do exist!
Thank you.
I am a new member and I do exist!
Thank you.
-
polarbear14
- Posts: 1
- Joined: Sun Jan 12, 2014 11:50 am
Re: New Members, Make your first post here!
Hello
Just jailed by first Mosin. I pick her up in 8 days. I'll be in touch with the forum once I get her and have questions.
Just jailed by first Mosin. I pick her up in 8 days. I'll be in touch with the forum once I get her and have questions.
- Junk Yard Dog
- Owner/Founder

- Posts: 48861
- Joined: Sat Aug 27, 2011 12:54 pm
- Location: New York
Re: New Member
Yes, you exist, and welcome to the boardSpaz57 wrote:Hello All,
I am a new member and I do exist!
Thank you.
Leave it as it is. The ages have been at work on it and man can only mar it.
Don't hit at all if it is honorably possible to avoid hitting; but never hit soft.
Theodore Roosevelt
Don't hit at all if it is honorably possible to avoid hitting; but never hit soft.
Theodore Roosevelt
- Junk Yard Dog
- Owner/Founder

- Posts: 48861
- Joined: Sat Aug 27, 2011 12:54 pm
- Location: New York
Re: New Members, Make your first post here!
Welcome to the board, first Mosin, great, look forward to hearing about itpolarbear14 wrote:Hello
Just jailed by first Mosin. I pick her up in 8 days. I'll be in touch with the forum once I get her and have questions.
Leave it as it is. The ages have been at work on it and man can only mar it.
Don't hit at all if it is honorably possible to avoid hitting; but never hit soft.
Theodore Roosevelt
Don't hit at all if it is honorably possible to avoid hitting; but never hit soft.
Theodore Roosevelt
Re: New Members, Make your first post here!
Hi, I'm Joe, picked up a new Mosin just after Christmas. I live in California. Boy...cosmoline is fun. Learning how to disassemble the whole thing to get rid of the cosmoline was even more fun. but, I have had it apart, cleaned, even the bolt apart and cleaned. Haven't gotten my headspace gauge yet but ordered one. Bolt and pin look like new, crown is perfect.
It is a hex made in 1931. has electro markings that say something about georgia, (i'm assuming soviet georgia and not down south)
bought 4 boxes of MFS ammo, Heading out to the range tonight. (unless someone says wait until the headspace is checked) Also got that package they sell at big 5 with the scope and sling abd rubber butt pad. Sling was not included wih mine but bayonet, and two ammo pouches and all the tools were.
Firing pin protrusion is dead on. My question is, should I take it out and sight it in, or, should I wait to check the headspace. I'm thinking as good as the crown is the headspace is probably pretty good too, but, don't want anything blowing up in my face either.
Thanks, look forward to comments as I'm sure after shooting I'll have lots more questions.
Joe
It is a hex made in 1931. has electro markings that say something about georgia, (i'm assuming soviet georgia and not down south)
bought 4 boxes of MFS ammo, Heading out to the range tonight. (unless someone says wait until the headspace is checked) Also got that package they sell at big 5 with the scope and sling abd rubber butt pad. Sling was not included wih mine but bayonet, and two ammo pouches and all the tools were.
Firing pin protrusion is dead on. My question is, should I take it out and sight it in, or, should I wait to check the headspace. I'm thinking as good as the crown is the headspace is probably pretty good too, but, don't want anything blowing up in my face either.
Thanks, look forward to comments as I'm sure after shooting I'll have lots more questions.
Joe
- Junk Yard Dog
- Owner/Founder

- Posts: 48861
- Joined: Sat Aug 27, 2011 12:54 pm
- Location: New York
Re: New Members, Make your first post here!
Welcome to the board Joe, always best to check headspace before firing the rifle. Otherwise, when the mortician is pulling the receiver fragments out of your skull, headspace gauges aren't much use.CSMJoe wrote:Hi, I'm Joe, picked up a new Mosin just after Christmas. I live in California. Boy...cosmoline is fun. Learning how to disassemble the whole thing to get rid of the cosmoline was even more fun. but, I have had it apart, cleaned, even the bolt apart and cleaned. Haven't gotten my headspace gauge yet but ordered one. Bolt and pin look like new, crown is perfect.
It is a hex made in 1931. has electro markings that say something about georgia, (i'm assuming soviet georgia and not down south)
bought 4 boxes of MFS ammo, Heading out to the range tonight. (unless someone says wait until the headspace is checked) Also got that package they sell at big 5 with the scope and sling abd rubber butt pad. Sling was not included wih mine but bayonet, and two ammo pouches and all the tools were.
Firing pin protrusion is dead on. My question is, should I take it out and sight it in, or, should I wait to check the headspace. I'm thinking as good as the crown is the headspace is probably pretty good too, but, don't want anything blowing up in my face either.
Thanks, look forward to comments as I'm sure after shooting I'll have lots more questions.
Joe
Leave it as it is. The ages have been at work on it and man can only mar it.
Don't hit at all if it is honorably possible to avoid hitting; but never hit soft.
Theodore Roosevelt
Don't hit at all if it is honorably possible to avoid hitting; but never hit soft.
Theodore Roosevelt
Re: New Members, Make your first post here!
New to this forum and the Mosin Nagant. I bought one from Cabela's in December to start my collection--A '42 Izhvesk. Wife bought me one for Christmas--A '35 Izhvesk barrel on a '38 receiver. Told her with that one, she officially made it a collection, and I could not be responsible for any further rifles. Well, last week got a '25 Izhvesk ex-Dragoon. I'm hooked.
- Junk Yard Dog
- Owner/Founder

- Posts: 48861
- Joined: Sat Aug 27, 2011 12:54 pm
- Location: New York
Re: New Members, Make your first post here!
Welcome to the boardksdog68 wrote:New to this forum and the Mosin Nagant. I bought one from Cabela's in December to start my collection--A '42 Izhvesk. Wife bought me one for Christmas--A '35 Izhvesk barrel on a '38 receiver. Told her with that one, she officially made it a collection, and I could not be responsible for any further rifles. Well, last week got a '25 Izhvesk ex-Dragoon. I'm hooked.
Leave it as it is. The ages have been at work on it and man can only mar it.
Don't hit at all if it is honorably possible to avoid hitting; but never hit soft.
Theodore Roosevelt
Don't hit at all if it is honorably possible to avoid hitting; but never hit soft.
Theodore Roosevelt
Re: New Members, Make your first post here!
Hi, new to the board, but a long time of appreciating these cool rifles/carbines. I wish they could tell me their stories sometimes. Anyways, hope to be a helpful contributing member here. Thanks for having me!
Timid men prefer the calm of despotism to the tempestuous sea of liberty. - Thomas Jefferson
Re: New Members, Make your first post here!
Hi ya'll
I'm Dave. Another guy with Mosinitis. Need to prove I'm I real person to activate account. I'm presently kinda busy, but will contribute and learn as much as I can here. I have 3 Mosins. A 1944 M 44,a 1954 T53, and a 1937 91/30. Plus my 30FFL just came in! Looking forward to learning from ya'll! And thanks for having such a great site!
I'm Dave. Another guy with Mosinitis. Need to prove I'm I real person to activate account. I'm presently kinda busy, but will contribute and learn as much as I can here. I have 3 Mosins. A 1944 M 44,a 1954 T53, and a 1937 91/30. Plus my 30FFL just came in! Looking forward to learning from ya'll! And thanks for having such a great site!
Coveter of stinky old rifles!
- Junk Yard Dog
- Owner/Founder

- Posts: 48861
- Joined: Sat Aug 27, 2011 12:54 pm
- Location: New York
Re: New Members, Make your first post here!
Welcome to the boardAxios wrote:Hi, new to the board, but a long time of appreciating these cool rifles/carbines. I wish they could tell me their stories sometimes. Anyways, hope to be a helpful contributing member here. Thanks for having me!
Leave it as it is. The ages have been at work on it and man can only mar it.
Don't hit at all if it is honorably possible to avoid hitting; but never hit soft.
Theodore Roosevelt
Don't hit at all if it is honorably possible to avoid hitting; but never hit soft.
Theodore Roosevelt
Re: New Members, Make your first post here!
Hello another new guy
- Junk Yard Dog
- Owner/Founder

- Posts: 48861
- Joined: Sat Aug 27, 2011 12:54 pm
- Location: New York
Re: New Members, Make your first post here!
Welcome to the board ToddToddP wrote:Hello another new guy
Leave it as it is. The ages have been at work on it and man can only mar it.
Don't hit at all if it is honorably possible to avoid hitting; but never hit soft.
Theodore Roosevelt
Don't hit at all if it is honorably possible to avoid hitting; but never hit soft.
Theodore Roosevelt
-
davidleemay1
- Posts: 1
- Joined: Fri Jan 17, 2014 9:30 pm
Re: New Members, Make your first post here!
New guy...have 1 Mosin I've had for 10 years (1943 91/30), bunch of other milsurps. Latest was a CZ82 bought with my C&R.
- Junk Yard Dog
- Owner/Founder

- Posts: 48861
- Joined: Sat Aug 27, 2011 12:54 pm
- Location: New York
Re: New Members, Make your first post here!
Welcome to the boarddavidleemay1 wrote:New guy...have 1 Mosin I've had for 10 years (1943 91/30), bunch of other milsurps. Latest was a CZ82 bought with my C&R.
Leave it as it is. The ages have been at work on it and man can only mar it.
Don't hit at all if it is honorably possible to avoid hitting; but never hit soft.
Theodore Roosevelt
Don't hit at all if it is honorably possible to avoid hitting; but never hit soft.
Theodore Roosevelt
-
peashooter
- Posts: 1
- Joined: Sun Jan 19, 2014 1:20 am
Re: New Members, Make your first post here!
My name is Greg and I'm from the Peoples Republic of Massachusetts. I joined because I can't stand not being able to see some of the pics that have been posted.
I only have ONE Mosin. It's a 1943 91/30 Izhevsk except for the bolt and one barrel band. Those are Tula. I picked up a no-go and field gauge and it has plenty of bolt to go before it will close on the no-go so I'm happy with that. The only problem was finding a company that our AG hasn't threatened and would ship ammo to MASS. I found a supply and all is good now. I can't say who.(loose lips sink ships) I'm hoping to pick up a M44 at some point just because. That's on hold for now since I'm in the process of a Garand. A lot of good reading on this site and can't believe some of the collections. NICE.
Greg
I only have ONE Mosin. It's a 1943 91/30 Izhevsk except for the bolt and one barrel band. Those are Tula. I picked up a no-go and field gauge and it has plenty of bolt to go before it will close on the no-go so I'm happy with that. The only problem was finding a company that our AG hasn't threatened and would ship ammo to MASS. I found a supply and all is good now. I can't say who.(loose lips sink ships) I'm hoping to pick up a M44 at some point just because. That's on hold for now since I'm in the process of a Garand. A lot of good reading on this site and can't believe some of the collections. NICE.
Greg


