Mixed & Matched Mosin Parts?

"Collectors Forum" - All Mosin Nagant are discussed here. Also the Russian and "Finnish capture" SVT38 and SVT40. This is an excellent place for new Mosin owners to ask questions. We have some of the best experts here looking forward to your questions. If you post a Mosin sniper rifle here, we may or may not move it to the sniper forum.

Preservation forum, please no altered military surplus rifles or discussions on altering in this forum. No sportsters. Please read the rules at the top of each forum
Post Reply
User avatar
MoSEEN.Nut
Posts: 30
Joined: Sun Sep 25, 2011 11:44 pm
Location: So Cal

Re: Mixed & Matched Mosin Parts?

Post by MoSEEN.Nut »

It's more than common, it's almost guaranteed!

How did the 91/30 fire?

Don't know if this is your first Mosin Nagant or not but the rule of thumb is you need to get another to compare it to and on and on.
User avatar
Jumperwire
Administrator
Administrator
Posts: 2019
Joined: Fri Aug 26, 2011 3:57 pm

Re: Mixed & Matched Mosin Parts?

Post by Jumperwire »

The Marks are probably the most fun on these rifles. OK part of the fun, but you know what I mean. You will find Hammers, Circles with "R" in them, bow and arrows, arrows, and all sorts of stuff. It's really intriguing. When you buy a few more you will start to notice the difference. :D :D
User avatar
bunkysdad
Administrator
Administrator
Posts: 10778
Joined: Fri Aug 26, 2011 8:22 pm
Location: Mesquite Texas near Dallas

Re: Mixed & Matched Mosin Parts?

Post by bunkysdad »

I love those bruises. The reminder on Monday of a great weekend!
User avatar
desdem12
Posts: 16839
Joined: Fri Aug 26, 2011 5:51 pm
Location: Eastern Washington

Re: Mixed & Matched Mosin Parts?

Post by desdem12 »

Welcome and bring on the pics :alien:
The commerce which maybe carried on with the people inhabiting the line you will pursue renders a knowledge of these people important ~Thomas Jefferson~ (to- Lewis and Clark)
User avatar
millman
Administrator
Administrator
Posts: 6391
Joined: Thu Aug 25, 2011 2:52 pm
Location: KY

Re: Mixed & Matched Mosin Parts?

Post by millman »

8-) 8-) 8-)
“Freedom is the right to tell people what they do not want to hear.” George Orwell, English novelist, essayist, and critic, 1903-1950

Of all tyrannies, a tyranny sincerely exercised for the good of its victims may be the most oppressive. It would be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated; but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience.

C. S. Lewis
User avatar
MoSEEN.Nut
Posts: 30
Joined: Sun Sep 25, 2011 11:44 pm
Location: So Cal

Re: Mixed & Matched Mosin Parts?

Post by MoSEEN.Nut »

Nice video, I like those POV's.

Winchester ammo? Next, an almost immediate step, get a tin or crate of some good Russian MilSurp corrosive. You have done the cosmoline cleaning routine already, now it's get the hang of doing a quick cleaning of the corrosive salts before you leave the range and a much more involved cleaning as soon as you get home. It's all part of the MN routine. Besides you probably can get an entire tin (440 rounds) for what you paid for the Winchester box.

At my age (70) I pack right a towel with the ammo. I got too many bruises already.

Now I would suggest your next purchase (and there will be more MN's) is a M44 or if you can afford it an M38. At the range when a M44 talks, the entire range listens!

Welcome to the world of Mosin Nagant's (MoSEEN NaGAN) and have fun.
User avatar
Izhevsk762
Posts: 930
Joined: Fri Aug 26, 2011 4:01 pm
Location: Norcal

Re: Mixed & Matched Mosin Parts?

Post by Izhevsk762 »

:toast:

The diamond mark is one of the refurbishment stamps.
The user formerly known as mosinnagantm9130
User avatar
Junk Yard Dog
Owner/Founder
Owner/Founder
Posts: 48861
Joined: Sat Aug 27, 2011 12:54 pm
Location: New York

Re: Mixed & Matched Mosin Parts?

Post by Junk Yard Dog »

What range were you shooting? 100, 125 yards? The "misses" would still be hits on a man sized target at that range, he be dead or so bad off as to be out of the fight for good and that's what the Mosin was made to do. SOme of these rifles may group shots into a spot the size of a half dollar on a target after years of practice, but most will not as the Soviets figured 4-6 MOA at that range was just fine. Rifles like the one you have were refurbished by the USSR after WW2, the idea was to store them away and use them to arm the Soviet people should the West invade, that never happened so now we get to play with them. During the refurb the rifle was stripped of every part, the parts went into giant piles of like parts and were refurbished together. These piles would have Tula, Izhevsk, along with any other arsenal that made the Mosin parts all mixed together, and no effort was made at the end of the line to match parts to whatever arsenal made the barrel and receiver. If you find a rifle with all matching parts, and it does happen, it's just by chance. Good shooting, in time you will get used to the action, like most military actions you can't baby it, smack that bolt hard, and as it's been refurbed you will have to break it in some.
Leave it as it is. The ages have been at work on it and man can only mar it.
Don't hit at all if it is honorably possible to avoid hitting; but never hit soft.
Theodore Roosevelt
User avatar
Hlavinka
Posts: 175
Joined: Sat Aug 27, 2011 1:47 pm
Location: Eastern PA

Re: Mixed & Matched Mosin Parts?

Post by Hlavinka »

Cool video, thanks! Good luck with your new addiction.
User avatar
Rongo
Administrator
Administrator
Posts: 6581
Joined: Thu Aug 25, 2011 6:39 pm
Location: Variable in my specific position of physical space

Re: Mixed & Matched Mosin Parts?

Post by Rongo »

Welcome!!

Glad to hear you enjoy the Mosin. I noticed in the video you were having some issue with the action... Very common with refurbs.

A good way of eliminating "Sticky bolt" can be found here on the mainpage; Sticky bolt solution
"Patriotism is supporting your country all the time, and your government when it deserves it". Mark Twain

"Dang that entropy"
User avatar
desdem12
Posts: 16839
Joined: Fri Aug 26, 2011 5:51 pm
Location: Eastern Washington

Re: Mixed & Matched Mosin Parts?

Post by desdem12 »

8-) 8-) 8-)
The commerce which maybe carried on with the people inhabiting the line you will pursue renders a knowledge of these people important ~Thomas Jefferson~ (to- Lewis and Clark)
User avatar
bunkysdad
Administrator
Administrator
Posts: 10778
Joined: Fri Aug 26, 2011 8:22 pm
Location: Mesquite Texas near Dallas

Re: Mixed & Matched Mosin Parts?

Post by bunkysdad »

Deoxys987, I just got around to watching your video above and I have a comment. Good Lord you have a nice place to shoot!
You do not have the required permissions to view the files attached to this post.
Post Reply