GEW 88/05 Issue.....

All collectible military bolt rifles are discussed here. From all countries around the world.

Preservation forum, please no altered military surplus rifles or discussions on altering in this forum. Please read the rules at the top of each forum.
Post Reply
User avatar
ffuries
Posts: 2799
Joined: Sun May 20, 2012 3:23 pm
Location: Florida

GEW 88/05 Issue.....

Post by ffuries »

Doing another post Hurricane Micheal gun cleaning, first one was a quick oiling and storage, this one is a major breakdown inspection, cleaning and oiling of the guns (12 done 28 more to go). Found this on my 1890 Danzig GEW 88/05, this is in the chamber area. Sad part is I've have shot this rifle and never seen this before, I've always shot commercial ammo through it.

My son took it out shooting not too long before the storm, and did the cleaning. You shoot it, you clean it.

So I'm assuming this is now regulated to wall hanger status or parts gun.

Sorry for the picture quality, they were taken with the cellphone.
You do not have the required permissions to view the files attached to this post.
Mike
TSgt, USAF Retired
Jan 86 - Sept 08
Aircrew Life Support
"Your Life Is Our Business"
(122X0, 1T1X1, 1P0X1)
NRA Life Member
User avatar
Junk Yard Dog
Owner/Founder
Owner/Founder
Posts: 48861
Joined: Sat Aug 27, 2011 12:54 pm
Location: New York

Re: GEW 88/05 Issue.....

Post by Junk Yard Dog »

Experimental rifle firing experimental ammunition and then altered several times, not to mention not made by Mauser. I am only amazed more of these don't show up with problems. I have fired two of mine, one being the Turk rework, probably the safest one to fire as they reheat treated the receiver's when they converted them to the standard Mauser type pattern. For the most part I put these in the non fire part of the collection, collected for history, not hole punching. That looks bad, wall hanger only.
Leave it as it is. The ages have been at work on it and man can only mar it.
Don't hit at all if it is honorably possible to avoid hitting; but never hit soft.
Theodore Roosevelt
User avatar
ffuries
Posts: 2799
Joined: Sun May 20, 2012 3:23 pm
Location: Florida

Re: GEW 88/05 Issue.....

Post by ffuries »

Junk Yard Dog wrote: ↑Sun Jul 07, 2019 8:13 pm Experimental rifle firing experimental ammunition and then altered several times, not to mention not made by Mauser. I am only amazed more of these don't show up with problems. I have fired two of mine, one being the Turk rework, probably the safest one to fire as they reheat treated the receiver's when they converted them to the standard Mauser type pattern. For the most part I put these in the non fire part of the collection, collected for history, not hole punching. That looks bad, wall hanger only.
She's a Turked one.......Paid $212.00 for it back in 2012, I can easily recoup that if I part her out. But I'll keep the bayonet and sling of course. Already have my eye on a replacement rifle.
Last edited by ffuries on Sun Jul 07, 2019 8:49 pm, edited 1 time in total.
Mike
TSgt, USAF Retired
Jan 86 - Sept 08
Aircrew Life Support
"Your Life Is Our Business"
(122X0, 1T1X1, 1P0X1)
NRA Life Member
User avatar
bunkysdad
Administrator
Administrator
Posts: 10778
Joined: Fri Aug 26, 2011 8:22 pm
Location: Mesquite Texas near Dallas

Re: GEW 88/05 Issue.....

Post by bunkysdad »

I still have not shot my GEW 88 primarily because I want to handload some gentler rounds for it, although it is S marked for the newer type ammo I just don't know enough about the pressures of modern 8mm Mauser. It should be ok, but........
User avatar
Junk Yard Dog
Owner/Founder
Owner/Founder
Posts: 48861
Joined: Sat Aug 27, 2011 12:54 pm
Location: New York

Re: GEW 88/05 Issue.....

Post by Junk Yard Dog »

ffuries wrote: ↑Sun Jul 07, 2019 8:35 pm
Junk Yard Dog wrote: ↑Sun Jul 07, 2019 8:13 pm Experimental rifle firing experimental ammunition and then altered several times, not to mention not made by Mauser. I am only amazed more of these don't show up with problems. I have fired two of mine, one being the Turk rework, probably the safest one to fire as they reheat treated the receiver's when they converted them to the standard Mauser type pattern. For the most part I put these in the non fire part of the collection, collected for history, not hole punching. That looks bad, wall hanger only.
She's a Turked one.......Paid $212.00 for it back in 2012, I can easily recoup that if I part her out. But I'll keep the bayonet and sling of course. Already have my eye on a replacement rifle.
You still have a barrel shroud on that one so it's been upgraded as far as the Germans did it, but not fully worked over. Fully redone it resembles the typical Turk Mauser. New barrel without shroud, new stock, basic action retained with some modifications. They had to reheat treat the receivers as there was welding involved in removing the barrel shroud and fitting it for the typical Mauser type wood handguard. Still not a rifle I feel confident in shooting more than once or twice, not when I have many perfectly good regular Mauser's with '98 actions.
Leave it as it is. The ages have been at work on it and man can only mar it.
Don't hit at all if it is honorably possible to avoid hitting; but never hit soft.
Theodore Roosevelt
User avatar
Junk Yard Dog
Owner/Founder
Owner/Founder
Posts: 48861
Joined: Sat Aug 27, 2011 12:54 pm
Location: New York

Re: GEW 88/05 Issue.....

Post by Junk Yard Dog »

bunkysdad wrote: ↑Sun Jul 07, 2019 8:44 pm I still have not shot my GEW 88 primarily because I want to handload some gentler rounds for it, although it is S marked for the newer type ammo I just don't know enough about the pressures of modern 8mm Mauser. It should be ok, but........
I am told, but haven't confirmed this, the major ammo makers keep the pressures low in fear you will load it in a GEW88. Same reason why the 45/70 regular loud is kept within safe pressures for trapdoor Springfield's ( not that you should be using smokeless load's in a trapdoor) Do not expect the same pressures from military ammo, the Turk round for instance is known to be slightly on the hot side.
Leave it as it is. The ages have been at work on it and man can only mar it.
Don't hit at all if it is honorably possible to avoid hitting; but never hit soft.
Theodore Roosevelt
User avatar
ffuries
Posts: 2799
Joined: Sun May 20, 2012 3:23 pm
Location: Florida

Re: GEW 88/05 Issue.....

Post by ffuries »

Junk Yard Dog wrote: ↑Mon Jul 08, 2019 2:30 am
ffuries wrote: ↑Sun Jul 07, 2019 8:35 pm
Junk Yard Dog wrote: ↑Sun Jul 07, 2019 8:13 pm Experimental rifle firing experimental ammunition and then altered several times, not to mention not made by Mauser. I am only amazed more of these don't show up with problems. I have fired two of mine, one being the Turk rework, probably the safest one to fire as they reheat treated the receiver's when they converted them to the standard Mauser type pattern. For the most part I put these in the non fire part of the collection, collected for history, not hole punching. That looks bad, wall hanger only.
She's a Turked one.......Paid $212.00 for it back in 2012, I can easily recoup that if I part her out. But I'll keep the bayonet and sling of course. Already have my eye on a replacement rifle.
You still have a barrel shroud on that one so it's been upgraded as far as the Germans did it, but not fully worked over. Fully redone it resembles the typical Turk Mauser. New barrel without shroud, new stock, basic action retained with some modifications. They had to reheat treat the receivers as there was welding involved in removing the barrel shroud and fitting it for the typical Mauser type wood handguard. Still not a rifle I feel confident in shooting more than once or twice, not when I have many perfectly good regular Mauser's with '98 actions.
Jim

Check your Gew 88/05 for me. I'm being told that isn't a crack, but a seam from the insert placed in it during conversion. Narrowing the chamber so it would accept stripper clips instead of enbloc style clips.

Would be great if that is so..........
Mike
TSgt, USAF Retired
Jan 86 - Sept 08
Aircrew Life Support
"Your Life Is Our Business"
(122X0, 1T1X1, 1P0X1)
NRA Life Member
User avatar
SA1911a1
Posts: 5996
Joined: Thu Aug 25, 2011 5:19 pm
Location: North Florida

Re: GEW 88/05 Issue.....

Post by SA1911a1 »

Mike, I just looked at my '89 Steyr and my '90 Lowe and both look the same. The Lowe has been "Turked" the Steyr, not, but marked for the spitzer ammo. Whoopee!
Aut Pax Aut Bellum
User avatar
ffuries
Posts: 2799
Joined: Sun May 20, 2012 3:23 pm
Location: Florida

Re: GEW 88/05 Issue.....

Post by ffuries »

SA1911a1 wrote: ↑Mon Jul 08, 2019 2:16 pm Mike, I just looked at my '89 Steyr and my '90 Lowe and both look the same. The Lowe has been "Turked" the Steyr, not, but marked for the spitzer ammo. Whoopee!
So yours have the seam also Steve?
Last edited by ffuries on Mon Jul 08, 2019 6:15 pm, edited 1 time in total.
Mike
TSgt, USAF Retired
Jan 86 - Sept 08
Aircrew Life Support
"Your Life Is Our Business"
(122X0, 1T1X1, 1P0X1)
NRA Life Member
User avatar
SA1911a1
Posts: 5996
Joined: Thu Aug 25, 2011 5:19 pm
Location: North Florida

Re: GEW 88/05 Issue.....

Post by SA1911a1 »

Here you go. Steyr at the top, Lowe the other two.
You do not have the required permissions to view the files attached to this post.
Aut Pax Aut Bellum
User avatar
ffuries
Posts: 2799
Joined: Sun May 20, 2012 3:23 pm
Location: Florida

Re: GEW 88/05 Issue.....

Post by ffuries »

Good deal, thank you Steve, now I can relax and press on.
Mike
TSgt, USAF Retired
Jan 86 - Sept 08
Aircrew Life Support
"Your Life Is Our Business"
(122X0, 1T1X1, 1P0X1)
NRA Life Member
User avatar
SA1911a1
Posts: 5996
Joined: Thu Aug 25, 2011 5:19 pm
Location: North Florida

Re: GEW 88/05 Issue.....

Post by SA1911a1 »

Yea Mike, either that or we will both commit suicide the same way.
Aut Pax Aut Bellum
User avatar
Junk Yard Dog
Owner/Founder
Owner/Founder
Posts: 48861
Joined: Sat Aug 27, 2011 12:54 pm
Location: New York

Re: GEW 88/05 Issue.....

Post by Junk Yard Dog »

I will have to dig them out, they are in cosmoline at the moment.
Leave it as it is. The ages have been at work on it and man can only mar it.
Don't hit at all if it is honorably possible to avoid hitting; but never hit soft.
Theodore Roosevelt
User avatar
Junk Yard Dog
Owner/Founder
Owner/Founder
Posts: 48861
Joined: Sat Aug 27, 2011 12:54 pm
Location: New York

Re: GEW 88/05 Issue.....

Post by Junk Yard Dog »

Shit, I forgot to dig one out, after a day running a machine in 90 degree heat and humidity I am just to beat to do it now, but we will get to it eventually.
Leave it as it is. The ages have been at work on it and man can only mar it.
Don't hit at all if it is honorably possible to avoid hitting; but never hit soft.
Theodore Roosevelt
Post Reply