The Great Gun Guru Smiled on this unworthy subject...

"Collectors Forum" - All Mosin Nagant are discussed here. Also the Russian and "Finnish capture" SVT38 and SVT40. This is an excellent place for new Mosin owners to ask questions. We have some of the best experts here looking forward to your questions. If you post a Mosin sniper rifle here, we may or may not move it to the sniper forum.

Preservation forum, please no altered military surplus rifles or discussions on altering in this forum. No sportsters. Please read the rules at the top of each forum
User avatar
ffuries
Posts: 2799
Joined: Sun May 20, 2012 3:23 pm
Location: Florida

Re: The Great Gun Guru Smiled on this unworthy subject...

Post by ffuries »

Damn you did a awesome job rescuing the "Old Gals", a lot better than I probably could have done. I was tempted, but didn't know how hard it would be, or how bad the stock would have looked afterwards. Better to leave them to those that have more skills than me. De-Bubba'd and looking proper again.

BTW how did you straighten out the bolt handle for future reference?
Mike
TSgt, USAF Retired
Jan 86 - Sept 08
Aircrew Life Support
"Your Life Is Our Business"
(122X0, 1T1X1, 1P0X1)
NRA Life Member
User avatar
thughes
Posts: 237
Joined: Sun Jul 28, 2013 4:35 pm

Re: The Great Gun Guru Smiled on this unworthy subject...

Post by thughes »

Stellar restoration work!
User avatar
Fledge
Posts: 985
Joined: Thu Dec 10, 2015 5:18 am
Location: Southeast Wisconsin

Re: The Great Gun Guru Smiled on this unworthy subject...

Post by Fledge »

Looks great! Holy crap that was fast work.
User avatar
qz2026
Posts: 4173
Joined: Wed Mar 20, 2013 5:54 am
Location: Nothern Lower Michigan

Re: The Great Gun Guru Smiled on this unworthy subject...

Post by qz2026 »

:thumbsup: :thumbsup: :thumbsup:

:clap: :clap: :clap: :clap:
User avatar
SA1911a1
Posts: 5996
Joined: Thu Aug 25, 2011 5:19 pm
Location: North Florida

Re: The Great Gun Guru Smiled on this unworthy subject...

Post by SA1911a1 »

Thanks for all of the nice comments guys. The work was quick because it was easy. The paint came off, lemon oil went on and it was done. The bolt was a mater of vicing it down heating it up cherry red and using a crescent wrench to lever it back to it's original position. I have several other bolts, and bolt bodies, but I wanted to keep the all Remington bolt with the gun.

Mosin-Nagant rifles have been so few and far between in these parts, I had given up looking for them. The shows would have one or two wartime examples at astronomical prices, or a cut-up version or two. I have started seeking out old revolvers. It is funny how it works, just when you least expect something, it will fall in your lap. It is a good lesson to keep going to the lame-ass shows, cause you never know when two old guys will be there with a stack of good stuff. Hell, it won't be long before I am one of those grumpy of farts on the other side of the table...and you guys are gonna like my table. :)
Aut Pax Aut Bellum
User avatar
steelbuttplate
Posts: 3938
Joined: Sat Nov 02, 2013 2:24 pm
Location: Foxhole in the Smoky Mtns. N.C.

Re: The Great Gun Guru Smiled on this unworthy subject...

Post by steelbuttplate »

You is one lucky dude Steve. So the Remington maybe never left the USA ? Very nice :thumbsup:
" There are two kinds of people, the good people and the ones that aggravate the hell out of the good people"
User avatar
SA1911a1
Posts: 5996
Joined: Thu Aug 25, 2011 5:19 pm
Location: North Florida

Re: The Great Gun Guru Smiled on this unworthy subject...

Post by SA1911a1 »

steelbuttplate wrote:You is one lucky dude Steve. So the Remington maybe never left the USA ? Very nice :thumbsup:
The Remington has Tula butt-pate and Izhevsk mag. plate. Who knows what it's path was. Maybe the barreled receiver and stock were stay homes and someone in the last 100 years swapped parts or maybe it just missed the import marking. Bubba may have built it from spare parts. Your guess is as good as mine. The receiver and barrel are in such pristine condition you can be sure that they never saw combat. What is puzzling is why it would have a bolt assembly that is all Remington, but not matching....
Aut Pax Aut Bellum
B24
Posts: 337
Joined: Mon Apr 01, 2013 7:12 pm
Location: North Mississippi

Re: The Great Gun Guru Smiled on this unworthy subject...

Post by B24 »

Looks good to me.
User avatar
neal45
Posts: 540
Joined: Sat Apr 06, 2013 3:49 pm
Location: South metro Atlanta

Re: The Great Gun Guru Smiled on this unworthy subject...

Post by neal45 »

Excellent recovery and nice deal. I love it when M91s show up and those 2 are great.
IH424
Posts: 116
Joined: Mon Jan 09, 2012 5:17 pm

Re: The Great Gun Guru Smiled on this unworthy subject...

Post by IH424 »

Was this at the Dothan, AL show?
User avatar
ffuries
Posts: 2799
Joined: Sun May 20, 2012 3:23 pm
Location: Florida

Re: The Great Gun Guru Smiled on this unworthy subject...

Post by ffuries »

IH424 wrote:Was this at the Dothan, AL show?
Yeap, the Gun and Knife Show at the National Peanut Festival Facility in Dothan.
Mike
TSgt, USAF Retired
Jan 86 - Sept 08
Aircrew Life Support
"Your Life Is Our Business"
(122X0, 1T1X1, 1P0X1)
NRA Life Member
User avatar
entropy
Posts: 2004
Joined: Fri Aug 26, 2011 5:19 pm
Location: Way North of Rongo

Re: The Great Gun Guru Smiled on this unworthy subject...

Post by entropy »

8-) :vcool: :thumbsup: Nice score, Steve!
"Igitur qui desiderat pacem, praeparet bellum." -Publius Flavius Vegetius Renatus

Murphy was an optimist.

A human being should be able to change a diaper, plan an
invasion, butcher a hog, design a building, conn a ship, write a
sonnet, balance accounts, build a wall, set a bone, comfort the
dying, take orders, give orders, cooperate, act alone, solve an
equation, analyze a new problem, pitch manure, program a
computer, cook a tasty meal, fight efficiently, die gallantly.
Specialization is for insects - Robert A. Heinlien
User avatar
catcracker
Posts: 1170
Joined: Mon Oct 15, 2012 12:46 pm
Location: Columbus, Ohio

Re: The Great Gun Guru Smiled on this unworthy subject...

Post by catcracker »

What can be said that hasn't already been said. That is a spectacular find. I would be making a fool of myself doing a jug, heading out the door, if that had been my deal.
:bravo: :bravo:
User avatar
kjohn
Posts: 373
Joined: Sun Feb 03, 2013 11:03 am
Location: Southeast Saskatchewan

Re: The Great Gun Guru Smiled on this unworthy subject...

Post by kjohn »

Good deal. :thumbsup: Bring the old girls home and feed them! Gotta love the history that comes unspoken with rifles like these two! :vcool:
GOOD RIDDANCE LGR!! If there isn't a gun range in heaven, then I'm going to hell.
Germans who wish to use firearms should join the SS or the SA - ordinary citizens don't need guns, as their having guns doesn't serve the State. Heinrich Himmler
User avatar
SA1911a1
Posts: 5996
Joined: Thu Aug 25, 2011 5:19 pm
Location: North Florida

Re: The Great Gun Guru Smiled on this unworthy subject...

Post by SA1911a1 »

I had a chance to get the pair to the range today. The Remington was fine, it shot minute of man easily, but the new NEW was a tack driver. It was an absolute pleasure to shoot and grouped tight with surplus ammo.

After the shoot, I made a trade, I let go of a M-1895 refurb for a 1926 Colt Army Special in .38 Spl. It is a really tight revolver with the magic Colt touch. I am quite pleased with the swap. My pony stable continues to grow. :) (correct grips are in this gun's future)
You do not have the required permissions to view the files attached to this post.
Aut Pax Aut Bellum
Shelbygt500
Posts: 138
Joined: Sun Jan 03, 2016 11:45 am

Re: The Great Gun Guru Smiled on this unworthy subject...

Post by Shelbygt500 »

Man you mase out like a bandit. That's a heck of a score. Awesome job restoring them. They look great. I'm totally jealous
User avatar
bunkysdad
Administrator
Administrator
Posts: 10778
Joined: Fri Aug 26, 2011 8:22 pm
Location: Mesquite Texas near Dallas

Re: The Great Gun Guru Smiled on this unworthy subject...

Post by bunkysdad »

Steve that was some nice work. I really like the old military 38 revolvers. And they are just plain fun to shoot too.
User avatar
SA1911a1
Posts: 5996
Joined: Thu Aug 25, 2011 5:19 pm
Location: North Florida

Re: The Great Gun Guru Smiled on this unworthy subject...

Post by SA1911a1 »

bunkysdad wrote:Steve that was some nice work. I really like the old military 38 revolvers. And they are just plain fun to shoot too.
I am stopping, on the way home from work, to pick up some .38 Spl., to make sure I like it as much as I thought I did yesterday.
Aut Pax Aut Bellum
User avatar
bunkysdad
Administrator
Administrator
Posts: 10778
Joined: Fri Aug 26, 2011 8:22 pm
Location: Mesquite Texas near Dallas

Re: The Great Gun Guru Smiled on this unworthy subject...

Post by bunkysdad »

I loaded up a few boxes of 148 gr wad cutters here awhile back and took my friend to the range to shoot his S&W model 10. He had that for about 20 years and never had shot it. Well those were nice mild loads and shot so nicely.
Post Reply