This is what is happening when you try to extract a round.....It seems to function ok with the exception of this issue (Extracted round comes back with the bolt)
New Mosin Extraction issue
New Mosin Extraction issue
This is what is happening when you try to extract a round.....It seems to function ok with the exception of this issue (Extracted round comes back with the bolt)
Re: New Mosin Extraction issue
hows the ejector /interupter? it may possably be hung up in the wood of the stock to check take the action out of the stock and see if it ejects
Re: New Mosin Extraction issue
That's the first thing I'd check, also. the I/E could be hung up, or held in by cosmoline. If it's not hung up, I'd replace the spring for the I/E (most are a two piece unit; some very old ones are one-piece.). while the I/E group is out, inspect the little 'block' that sticks out. (The actual ejector) If it's worn or 'dinged' in, replace it also. A new I/E group is an inexpensive and easy fix.
"Igitur qui desiderat pacem, praeparet bellum." -Publius Flavius Vegetius Renatus
Murphy was an optimist.
A human being should be able to change a diaper, plan an
invasion, butcher a hog, design a building, conn a ship, write a
sonnet, balance accounts, build a wall, set a bone, comfort the
dying, take orders, give orders, cooperate, act alone, solve an
equation, analyze a new problem, pitch manure, program a
computer, cook a tasty meal, fight efficiently, die gallantly.
Specialization is for insects - Robert A. Heinlien
Murphy was an optimist.
A human being should be able to change a diaper, plan an
invasion, butcher a hog, design a building, conn a ship, write a
sonnet, balance accounts, build a wall, set a bone, comfort the
dying, take orders, give orders, cooperate, act alone, solve an
equation, analyze a new problem, pitch manure, program a
computer, cook a tasty meal, fight efficiently, die gallantly.
Specialization is for insects - Robert A. Heinlien
-
bunkysdad
- Administrator
- Posts: 10778
- Joined: Fri Aug 26, 2011 8:22 pm
- Location: Mesquite Texas near Dallas
Re: New Mosin Extraction issue
Some snap caps would be a much safer bet than loading and unloading live rounds in the house. And fortunately they actually make them in our caliber. How well have you cleaned the area? It has to be disassembled to remove the interruptor/extractor piece that Entropy is talking about just to clean it properly in the slot that the interruptor rides in.