not a joke?

graphic914 · Post by **graphic914** » Wed Dec 04, 2013 7:27 pm

Mosin soup, mmmmm

polymerase2 · Post by **polymerase2** » Wed Dec 04, 2013 8:40 pm

I use a 44" Dewey with a brass jag from the breach. I soak everything for days in a mixture of :mineral spirits, kerosine, Marvel mystery oil and rislone. I just pour it back in the jug and leave the last few ounces behind. The actual recipe is on the Makarov site.
http://makarov.com/tech.html
scroll down to the bottom

gurn · Post by **gurn** » Wed Dec 04, 2013 8:52 pm

I wonder what wine would go well with boiled bolts?

Fred_G · Post by **Fred_G** » Wed Dec 04, 2013 9:05 pm

gurn wrote:I wonder what wine would go well with boiled bolts?

Sauvignon blanc?

jimpierce7 · Post by **jimpierce7** » Wed Dec 04, 2013 9:12 pm

No wine with Mosin bolts. Please. Vodka. lol

I do know I want to get a one piece rod. Dang thing keeps unscrewing on me. Once again, seems I was doing things wrong all those years ago. Go figure?

gurn · Post by **gurn** » Wed Dec 04, 2013 9:18 pm

I really like my Otis flexible pull through set up.

zeebill · Post by **zeebill** » Thu Dec 05, 2013 7:43 am

graphic914 wrote:Mosin soup, mmmmm

Maybe if we save the bigger pieces we could make stew?

polymerase2 wrote:I use a 44" Dewey with a brass jag from the breach. I soak everything for days in a mixture of :mineral spirits, kerosine, Marvel mystery oil and rislone. I just pour it back in the jug and leave the last few ounces behind. The actual recipe is on the Makarov site.
http://makarov.com/tech.html
scroll down to the bottom

Dang does that stuff bubble while it is in the jug waiting for the next task? I would love to see the MSDS sheet on that and see all the stuff it could cause!

Bill

kamakazi339 · Post by **kamakazi339** » Thu Dec 05, 2013 11:05 am

CLP and Hoppes that's all ive ever used and no issues...

cjsimoh · Post by **cjsimoh** » Sat Dec 07, 2013 7:39 am

I use an ultrasonic cleaner that I got from Harbor Freight. It looks like it's essentially the same model as the Lyman model that Brownells sells for a lot more. If you wait for a 25% off Harbor Freight coupon, it's a great deal at about $62. I fill it with degreaser and all Mosin parts will fit in it (except barrel/receiver, bayos, etc..). It has a heat setting too and it cleans everything down to the pores.

Harbor Freight:
http://www.harborfreight.com/25-liter-u ... 95563.html

Brownells:
http://www.brownells.com/reloading/case ... 43774.aspx

graphic914 · Post by **graphic914** » Sat Dec 07, 2013 8:36 am

Great find, need to stop by HF tomorrow

Joeinthehills · Post by **Joeinthehills** » Sat Dec 07, 2013 10:32 am

bunkysdad wrote:My favorite rod is a one piece carbon fiber rod and 44" long. It is made by Tipton and I just remove the bolt and clean from the breach end. I have not boiled my bolt, but get the same results with boiling water. If you soak the bot down it needs to be disassembled, which I think is probably what you were talking about. Boiling all the bolt pieces.

X'2 And I drop the bolt in varsol and then take a small paint brush to it; then oil it down.

The Russian Mosin Nagant Forum

not a joke?

Re: not a joke?

Re: not a joke?

Re: not a joke?

Re: not a joke?

Re: not a joke?

Re: not a joke?

Re: not a joke?

Re: not a joke?

Re: not a joke?

Re: not a joke?

Re: not a joke?