First BP rifle...now what do I do

If it fires black powder, it is discussed here.
User avatar
SA1911a1
Posts: 5996
Joined: Thu Aug 25, 2011 5:19 pm
Location: North Florida

First BP rifle...now what do I do

Post by SA1911a1 »

I did the easy part. I found a Thompson Center Hawkins percussion rifle at an antique store and bought it. I had no real feel for the value of the thing, but it sold for less than a 91/30......

.50 cal. with double set, adjustable triggers.

I bought it for trade goods, I just can't see myself setting up a new hobby.
Aut Pax Aut Bellum
User avatar
desdem12
Posts: 16839
Joined: Fri Aug 26, 2011 5:51 pm
Location: Eastern Washington

Re: First BP rifle...now what do I do

Post by desdem12 »

This is not a new hobby just an adjusted one. Get some basic stuff for it and give it a try first. .490 balls and a pound of cheap ffg black powder or substitute and some no.11 caps. A cheapo powder measure and some pre lubed patchs and you are good to go. 60 grains of powder aught to do it or maybe 70. :thumbsup:
Who knows you might like it. :thumbsup: :thumbsup: :thumbsup:
The commerce which maybe carried on with the people inhabiting the line you will pursue renders a knowledge of these people important ~Thomas Jefferson~ (to- Lewis and Clark)
User avatar
SA1911a1
Posts: 5996
Joined: Thu Aug 25, 2011 5:19 pm
Location: North Florida

Re: First BP rifle...now what do I do

Post by SA1911a1 »

I was thinking of adding some accessories and making it tacticool.. Laser, flashlight, reflex sights etc. Do they make quad rails for this rifle?
Aut Pax Aut Bellum
User avatar
desdem12
Posts: 16839
Joined: Fri Aug 26, 2011 5:51 pm
Location: Eastern Washington

Re: First BP rifle...now what do I do

Post by desdem12 »

Sure glue screw and tattoo the stuff to the barrel and have at it. Don't forget the 12x50 lighted scope for shooting looong distances over 50 yards (upto at least 100 :thumbsup: ) :lol:
The commerce which maybe carried on with the people inhabiting the line you will pursue renders a knowledge of these people important ~Thomas Jefferson~ (to- Lewis and Clark)
User avatar
tjtM38
Posts: 2553
Joined: Sun Dec 25, 2011 10:41 am
Location: Northeast Mississippi

Re: First BP rifle...now what do I do

Post by tjtM38 »

I would like to see some pictures. It sounds like a nice rifle. :thumbsup:
User avatar
Celt
Posts: 3901
Joined: Sat Apr 07, 2012 3:07 pm
Location: Good Hope Illinois

Re: First BP rifle...now what do I do

Post by Celt »

Tc has one called a grey hawk or something. Its stainless with plastic fantastic furniture.

Where are the pictures if this rifle Steve??
No pictures, no happen... :bwink:
You have enemies? Good. That means you've stood up for something, sometime in your life.
Winston Churchill





ΜΟΛΩΝ ΛΑΒΕ!
User avatar
mogunner
Posts: 1896
Joined: Wed Sep 28, 2011 8:23 pm
Location: Central Eastern Southern Missouri

Re: First BP rifle...now what do I do

Post by mogunner »

You should send it to me....I just passed on a CVA .45 rifle, didn't want to add yet another caliber to buy stuff for, I already have a .50 in line so wouldn't have to buy a whole lot than what I already have!
User avatar
ponycarman
Posts: 2661
Joined: Mon Nov 21, 2011 10:00 pm
Location: Upstate, SC

Re: First BP rifle...now what do I do

Post by ponycarman »

Sound like you got a great deal. And I didn't get such a great deal lol. Pics!
Let me make a short, open, blanket comment. There are no good guns. There are no bad guns. Any gun in the hands of a bad man is a bad thing. Any gun in the hands of a descent person is no threat to anyone--- except bad people. -- Charleton Heston

Guns are not good, they are not evil. Save those descriptions for the people holding the firearm. -- Unknown

1943 Izhevsk
1937 Izhevsk
1935/48/50 Tula (hex)
1939 Tula (laminate stock)
And many other firearms :D
Ironnewt
Posts: 3021
Joined: Tue Sep 20, 2011 8:44 am
Location: Northeastern Maryland

Re: First BP rifle...now what do I do

Post by Ironnewt »

I want to see it with before and after pictures. As it is now and once it's been propertly 'Pimped" You know, Given the Mall Ninja treatment. As these don't come with bayonets you are going to have to waste a rail for one, so can I suggest a dual rail for your optics? one is off set about 45 degrees so you can crank the butt over to line up the back up optic. As a primary I'd use a scope, at least 25 power. Oh, do you plan to have this "Chromed" ? I'd put a vertical fore grip on it as well. If you put the bayonet on the bottom, you might have enough room for your fore grip on that rail. Just make sure you can still get to the ram rod.
Damn, I'll bet that's going to leave a mark! Probably hurt too!
"I think Congressmen should wear uniforms,
you know, like NASCAR drivers, so we could
identify their corporate sponsors."

"When I die, I want to be facing my enemies surrounded by their dead bodies and piles of spent brass"
"Never argue with an idiot. He will drag you down to his level and beat you with experience." - Mark Twain

804
User avatar
SA1911a1
Posts: 5996
Joined: Thu Aug 25, 2011 5:19 pm
Location: North Florida

Re: First BP rifle...now what do I do

Post by SA1911a1 »

Ironnewt wrote:I want to see it with before and after pictures. As it is now and once it's been propertly 'Pimped" You know, Given the Mall Ninja treatment. As these don't come with bayonets you are going to have to waste a rail for one, so can I suggest a dual rail for your optics? one is off set about 45 degrees so you can crank the butt over to line up the back up optic. As a primary I'd use a scope, at least 25 power. Oh, do you plan to have this "Chromed" ? I'd put a vertical fore grip on it as well. If you put the bayonet on the bottom, you might have enough room for your fore grip on that rail. Just make sure you can still get to the ram rod.
I will silver solder the bayonet to the rifle. Chrome is tacky, I will go with nickle. I haven't considered the vertical fore grip, thanks for the suggestion.

Since I can't get away without photos, I will show you the before here:
You do not have the required permissions to view the files attached to this post.
Aut Pax Aut Bellum
User avatar
Celt
Posts: 3901
Joined: Sat Apr 07, 2012 3:07 pm
Location: Good Hope Illinois

Re: First BP rifle...now what do I do

Post by Celt »

A telescopic ram rod! Oh,oh make it carbon fiber!
You have enemies? Good. That means you've stood up for something, sometime in your life.
Winston Churchill





ΜΟΛΩΝ ΛΑΒΕ!
User avatar
SA1911a1
Posts: 5996
Joined: Thu Aug 25, 2011 5:19 pm
Location: North Florida

Re: First BP rifle...now what do I do

Post by SA1911a1 »

Celt wrote:A telescopic ram rod! Oh,oh make it carbon fiber!
Now that I have this rifle, I think I need a new cap.........
You do not have the required permissions to view the files attached to this post.
Aut Pax Aut Bellum
User avatar
Junk Yard Dog
Owner/Founder
Owner/Founder
Posts: 48861
Joined: Sat Aug 27, 2011 12:54 pm
Location: New York

Re: First BP rifle...now what do I do

Post by Junk Yard Dog »

You get powder, ball, patches, powder measure, powder horn, caps, vent pic, capper, bullet mold , small Lee production pot and lead. We then teach you how to use the. Cap locks like this ar enot that hard to get the hang of. You also call the company to get an owners manual that will tell you the proper powder charges.
Leave it as it is. The ages have been at work on it and man can only mar it.
Don't hit at all if it is honorably possible to avoid hitting; but never hit soft.
Theodore Roosevelt
User avatar
SA1911a1
Posts: 5996
Joined: Thu Aug 25, 2011 5:19 pm
Location: North Florida

Re: First BP rifle...now what do I do

Post by SA1911a1 »

Junk Yard Dog wrote:You get powder, ball, patches, powder measure, powder horn, caps, vent pic, capper, bullet mold , small Lee production pot and lead. We then teach you how to use the. Cap locks like this ar enot that hard to get the hang of. You also call the company to get an owners manual that will tell you the proper powder charges.
I don't think so, Jim. I really picked this up, only because it was under-priced, and I thought it would make a great trade or GB item, to raise funds for buying Mosin-Nagants.
Aut Pax Aut Bellum
User avatar
Junk Yard Dog
Owner/Founder
Owner/Founder
Posts: 48861
Joined: Sat Aug 27, 2011 12:54 pm
Location: New York

Re: First BP rifle...now what do I do

Post by Junk Yard Dog »

You are missing out :)
Leave it as it is. The ages have been at work on it and man can only mar it.
Don't hit at all if it is honorably possible to avoid hitting; but never hit soft.
Theodore Roosevelt
User avatar
desdem12
Posts: 16839
Joined: Fri Aug 26, 2011 5:51 pm
Location: Eastern Washington

Re: First BP rifle...now what do I do

Post by desdem12 »

That coon skin hat sure looks clean, You been bathing your hat prematurely? :shock: :lol:
The commerce which maybe carried on with the people inhabiting the line you will pursue renders a knowledge of these people important ~Thomas Jefferson~ (to- Lewis and Clark)
User avatar
SA1911a1
Posts: 5996
Joined: Thu Aug 25, 2011 5:19 pm
Location: North Florida

Re: First BP rifle...now what do I do

Post by SA1911a1 »

desdem12 wrote:That coon skin hat sure looks clean, You been bathing your hat prematurely? :shock: :lol:
I have a big head. I am still "growing" my hat. :D
Aut Pax Aut Bellum
User avatar
mogunner
Posts: 1896
Joined: Wed Sep 28, 2011 8:23 pm
Location: Central Eastern Southern Missouri

Re: First BP rifle...now what do I do

Post by mogunner »

You should really put it up for sale here first.... :chuckles:
User avatar
desdem12
Posts: 16839
Joined: Fri Aug 26, 2011 5:51 pm
Location: Eastern Washington

Re: First BP rifle...now what do I do

Post by desdem12 »

The Hat :thumbsup: ..Or...The Rifle :shock:
The commerce which maybe carried on with the people inhabiting the line you will pursue renders a knowledge of these people important ~Thomas Jefferson~ (to- Lewis and Clark)
User avatar
mogunner
Posts: 1896
Joined: Wed Sep 28, 2011 8:23 pm
Location: Central Eastern Southern Missouri

Re: First BP rifle...now what do I do

Post by mogunner »

Yes!
Post Reply