First shots - need stock extender

"Collectors Forum" - All Mosin Nagant are discussed here. Also the Russian and "Finnish capture" SVT38 and SVT40. This is an excellent place for new Mosin owners to ask questions. We have some of the best experts here looking forward to your questions. If you post a Mosin sniper rifle here, we may or may not move it to the sniper forum.

Preservation forum, please no altered military surplus rifles or discussions on altering in this forum. No sportsters. Please read the rules at the top of each forum
User avatar
Red Green
Posts: 13
Joined: Fri Mar 01, 2013 5:58 pm
Location: St. Louis, MO

First shots - need stock extender

Post by Red Green »

I took my Mosin to the range today and fired it for the first time. First things first...it was a blast. The recoil was not as bad as I thought it would be, less then my 12 gauge shotgun. I also tried shooting with the bayonet. It sure makes the rifle look long. Getting used to the sights took a little time, but I was at least able to hit the target at 100 yards. I do have to aim a little low, but at least I hit paper. My rifle did not exhibit any sticky bolt. After a few rounds I did wipe the chamber to clean up any cosmoline that I may have missed. I did not see any after the first 20 rounds, so i stopped doing it. I shot about 100 rounds to put the gun (and me) through the paces. One thing I do need to take care of though. I am 6' 4" with a large frame. The stock on this gun is way too short. Without modifying the stock, what would you veterans recommend I use to extend the stock?
"Quando omni flunkus moritati"
(When all else fails, play dead)
User avatar
millman
Administrator
Administrator
Posts: 6391
Joined: Thu Aug 25, 2011 2:52 pm
Location: KY

Re: First shots - need stock extender

Post by millman »

A Limbsaver slip-on recoil pad will take care of the length.
“Freedom is the right to tell people what they do not want to hear.” George Orwell, English novelist, essayist, and critic, 1903-1950

Of all tyrannies, a tyranny sincerely exercised for the good of its victims may be the most oppressive. It would be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated; but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience.

C. S. Lewis
User avatar
WeldonHunter
Posts: 5242
Joined: Sun Sep 11, 2011 7:55 pm
Location: Louisiana
Contact:

Re: First shots - need stock extender

Post by WeldonHunter »

Red Green wrote:I took my Mosin to the range today and fired it for the first time. First things first...it was a blast. The recoil was not as bad as I thought it would be, less then my 12 gauge shotgun. I also tried shooting with the bayonet. It sure makes the rifle look long. Getting used to the sights took a little time, but I was at least able to hit the target at 100 yards. I do have to aim a little low, but at least I hit paper. My rifle did not exhibit any sticky bolt. After a few rounds I did wipe the chamber to clean up any cosmoline that I may have missed. I did not see any after the first 20 rounds, so i stopped doing it. I shot about 100 rounds to put the gun (and me) through the paces. One thing I do need to take care of though. I am 6' 4" with a large frame. The stock on this gun is way too short. Without modifying the stock, what would you veterans recommend I use to extend the stock?

Red I'm surprised you didn't think of this. "Duct Tape, It's the handyman's best friend" Sorry I couldn't resist. :chuckles:

Seriously though the Limbsaver is a great idea. My shooting buddy has one and he swears by it.
User avatar
desdem12
Posts: 16839
Joined: Fri Aug 26, 2011 5:51 pm
Location: Eastern Washington

Re: First shots - need stock extender

Post by desdem12 »

Sweet. 100 rds is a good work out. :biggrin: :thumbsup:
The commerce which maybe carried on with the people inhabiting the line you will pursue renders a knowledge of these people important ~Thomas Jefferson~ (to- Lewis and Clark)
User avatar
Red Green
Posts: 13
Joined: Fri Mar 01, 2013 5:58 pm
Location: St. Louis, MO

Re: First shots - need stock extender

Post by Red Green »

I forgot about the Limbsaver slip on. Anyone know what size I would need to get? Also, to top off the great day my order for 880 rounds of Bulgarian Surplus ammo came in today. Received 2 440 round spam cans of 1972 silver tip ammo. Luckily it did come with the opener. Can't wait to try them out, although I expect they won't perform much different than the Brown Bear I've been using.
"Quando omni flunkus moritati"
(When all else fails, play dead)
User avatar
rideandslidejim
Posts: 964
Joined: Wed Nov 28, 2012 5:09 pm
Location: Waynesville Georgia { Outside of Brunswick }

Re: First shots - need stock extender

Post by rideandslidejim »

Not that great for recoil, but will add an inch in length.

Jim
Member of the Lousy Spellers Of America Asso.
User avatar
mogunner
Posts: 1896
Joined: Wed Sep 28, 2011 8:23 pm
Location: Central Eastern Southern Missouri

Re: First shots - need stock extender

Post by mogunner »

I'm 6'4" and run 230 lbs or so, I bought one of those, didn't do what I wanted as far as recoil reduction but did extend the length of pull. Ended up going with a nylon closed cell pad that I can switch between all the Mosin's as well as my BP .50 and the 12 gauge.
User avatar
rideandslidejim
Posts: 964
Joined: Wed Nov 28, 2012 5:09 pm
Location: Waynesville Georgia { Outside of Brunswick }

Re: First shots - need stock extender

Post by rideandslidejim »

Agree with the recoil part, but thought he was looking mainly to extend the stock ! Plus the look fairly nice. i have seen them in brown also.


Jim
Member of the Lousy Spellers Of America Asso.
User avatar
jonnyboy091373
Posts: 509
Joined: Sat Sep 01, 2012 3:02 am
Location: Ellsworth, Maine

Re: First shots - need stock extender

Post by jonnyboy091373 »

I just use a folded up towel. Adds about an inch, and should be free. Plus it gives you something soft to set the rifle on between shots and what not. May seem hitchhiker's guide to the galaxy-ish, but it works well for me, and I'm 6'2"
User avatar
millman
Administrator
Administrator
Posts: 6391
Joined: Thu Aug 25, 2011 2:52 pm
Location: KY

Re: First shots - need stock extender

Post by millman »

The small size fits well.
“Freedom is the right to tell people what they do not want to hear.” George Orwell, English novelist, essayist, and critic, 1903-1950

Of all tyrannies, a tyranny sincerely exercised for the good of its victims may be the most oppressive. It would be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated; but those who torment us for our own good will torment us without end for they do so with the approval of their own conscience.

C. S. Lewis
User avatar
mogunner
Posts: 1896
Joined: Wed Sep 28, 2011 8:23 pm
Location: Central Eastern Southern Missouri

Re: First shots - need stock extender

Post by mogunner »

rideandslidejim wrote:Agree with the recoil part, but thought he was looking mainly to extend the stock ! Plus the look fairly nice. i have seen them in brown also.


Jim

Oh yeah, it extends the stock real well. I still have it, stashed away with all my other "goodies" in the box of "stuff"... :brolleyes:
User avatar
Red Green
Posts: 13
Joined: Fri Mar 01, 2013 5:58 pm
Location: St. Louis, MO

Re: First shots - need stock extender

Post by Red Green »

Thanks for all of the replies. My local Cabela's has the small Limbsaver in stock, and I still have a gift card from Christmas that will more than cover it. I'll pick one up this Saturday. I just need to get a sling and I'll be set. Can't wait to go back out. Besides my 1938 Izhevsk Mosin, I have a 1954 Izhevsk SKS that shoots well...will make a nice pair at the range.
"Quando omni flunkus moritati"
(When all else fails, play dead)
User avatar
mogunner
Posts: 1896
Joined: Wed Sep 28, 2011 8:23 pm
Location: Central Eastern Southern Missouri

Re: First shots - need stock extender

Post by mogunner »

Where do you shoot at, Red...I'm just south of you a bit, I go down to a buddy's place south of Desoto and shoot on his property, figured most ranges around here don't like Mosin's OR steel core ammo!
User avatar
BubbaDX
Posts: 1784
Joined: Sat Aug 11, 2012 5:29 pm
Location: St. Louis, Missouri

Re: First shots - need stock extender

Post by BubbaDX »

J Henges off I44 allows steel core ammo but they have strict rules against rapid fire. So does the Arnold Gun Club, but you have to have a membership or be with someone who does to get in. I am told the shooting range out by Busch Wildlife also allows steel core ammo but I have never been out there myself to find out.
"The welfare of humanity is always the alibi of tyrants." - Albert Camus
User avatar
Red Green
Posts: 13
Joined: Fri Mar 01, 2013 5:58 pm
Location: St. Louis, MO

Re: First shots - need stock extender

Post by Red Green »

I have two brothers that own property near Mark Twain Lake. There is a gun range there run by the Army Core of Engineers. That is where I do most of my shooting. Busch Wildlife has gotten so crowded the last time I was there I waited over an hour, and could only shoot for an hour.
"Quando omni flunkus moritati"
(When all else fails, play dead)
User avatar
wolfstein
Posts: 589
Joined: Wed Sep 05, 2012 7:28 am
Location: Southeast USA

Re: First shots - need stock extender

Post by wolfstein »

before I got my Limbsaver I made my own with a piece of foam rubber and duct tape. Works very well.
You do not have the required permissions to view the files attached to this post.
User avatar
Junk Yard Dog
Owner/Founder
Owner/Founder
Posts: 48861
Joined: Sat Aug 27, 2011 12:54 pm
Location: New York

Re: First shots - need stock extender

Post by Junk Yard Dog »

:pointup: :vcool:
Leave it as it is. The ages have been at work on it and man can only mar it.
Don't hit at all if it is honorably possible to avoid hitting; but never hit soft.
Theodore Roosevelt
FINNADDICT
Posts: 174
Joined: Fri Mar 01, 2013 5:34 pm
Location: FORT BRAGG NC

Re: First shots - need stock extender

Post by FINNADDICT »

Since you said recoil is light.... attach an additional 10 metal butt plates.
TO WIN YOU NEED A FINN
User avatar
rideandslidejim
Posts: 964
Joined: Wed Nov 28, 2012 5:09 pm
Location: Waynesville Georgia { Outside of Brunswick }

Re: First shots - need stock extender

Post by rideandslidejim »

You know your a redneck when ------ :pointup: :pointup: :pointup:

Jim
Member of the Lousy Spellers Of America Asso.
FINNADDICT
Posts: 174
Joined: Fri Mar 01, 2013 5:34 pm
Location: FORT BRAGG NC

Re: First shots - need stock extender

Post by FINNADDICT »

rideandslidejim wrote:You know your a redneck when ------ :pointup: :pointup: :pointup:

Jim
At least those would be correct pieces and not a 2x4 nailed to the end with 37 nails, a sock stuffed with old underwear or a brick. That's redneck.
TO WIN YOU NEED A FINN
Post Reply